Press the power button 5 times to switch the battery on or off.
When the battery is on standby, press the power button 3 times to select between power mode and temperature control mode. Power mode is indicated by a red light while temperature control mode is displayed in green.
Make sure the tank coil is at room temperature.
The LED ring around the fire button will flash 3 times when the atomizer resistance is less than 0.1 ohm or the SUBVOD detects that no coil is installed.
The fire button will flash 3 times when the battery needs a recharge. The bottom LED will glow red when the battery is connected to a power source, and turn green once the battery is fully charged.
The SUBVOD has a 10-second cutoff to protect the device from overheating.
