What Will You Get from Mini Tank C Kit - Maskking Vape

Mini Tank C will be your vape？

Have you heard that Maskking has launched a Pen Style Kit? Yes, this is a high-performance Vape Kit that I want to recommend to you today. It is the Mini Tank C Kit. This portable Starter Kit has finger size. We can easily carry it in our pocket without worrying about it taking up space.

Mini Tank C has a 1800mAh battery and can charge up to 72 hours of battery life in three hours of charging. The long vaping time brings a smoother vaping experience. Equipped with two MTL coils to ensure we get a more delicate taste and Cloud.

We can also use the dustproof cap to prevent drip tip contamination when we are not using it. If you like this product too, let's take a look at what’s in the Mini Tank C Kit Package:

1 x Maskking Mini Tank C Kit

2 x Sub-coils

1 x Package

1 x Glass Tube

1 x Charge Cable

1 x User Manual (please read the instructions carefully before use to ensure a better experience)

1 x warranty card

1 x silicone rubber ring set

1 x vape pen back

Read it! Before You Decide to Buy the SMOK Nord AIO 19 Kit

You Should Know Nord AIO 19 Kit

The Nord AIO 19 Kit has been released, and I know everyone likes it. This is a very SMOK design style and is a classic Pen Kit look. The sleek design and compact size allow us to carry it in our pocket easily. SMOK offers us up to 6 colors to choose from, so which one do you like?

Nord 19 Kit Details

Let me tell you more details before you decide to buy the SMOK Nord 19 Kit. This device is an AIO structure, which means it can be used more easily. Of course, there will be some trouble here. If your Glass tube is accidentally damaged, it will be difficult to replace the new Glass tube.

The 19mm diameter gives us 1300mAh battery capacity and 2ml e-juice capacity. As an entry-level product, the Nord Kit offers us two vaping experiences. MTL VAPING and DL VAPING. If you are using vape for the first time, then the Nord 19 Kit is enough for all your vaping needs.

If you also like the Nord 19 Kit, you can buy it at the Sourcemore online shop. For more information on purchasing, please visit Sourcemore.com

Why Beginners Choose Vaporesso QF SOLO Kit?

Easy-to-use, QF SOLO Kit

Yes, I know you are looking for an easy-to-use entry-level Vape, right? For beginners, the taste and ease of getting started are the essential key conditions. If you think so, then Vaporesso QF SOLO is what you want.

Why we choose QF SOLO Starter Kit？

The Vaporesso QF SOLO Kit is designed with a fire button that can be used by just pressing the fire button. You don't need to do any setup or operation before using it, and you can vaping without any thoughts.

The QF Mesh coil made of Flax Fiber and Cotton guarantees excellent liquid absorption. It not only better prevents e-liquid leakage but also brings better taste and more excellent atomization. If you have always wanted to try a massive vapor and comfortable e-cigarette experience, it will be your best choice.

QF SOLO Starter Kit Details

Size 30mm (D) x 130mm (H)
Capacity 8ml
Battery Built-in 3000mAh battery
Coil QF Meshed coil 0.2ohm, QF Strip coil 0.15ohm
Thread 510

Where can I buy Vaporesso QF SOLO?

It is now available at Sourcemore vape shop. It comes in 4 optional colors and is available in 8ml versions. What are you waiting for?

3Tips to Buy Cheap Vaporesso Skrr Tank - Christmas 2018

Massive Vapor？Vaporesso Skrr Tank

Vaporesso Skrr Tank is a hot product recently. This device has an extra capacity of 8ml. For Vaper like massive vapor or DL ​​Vaping, it would be a wise choice. The Skrr Tank is equipped with two coils for a more impactful vapor experience.

Both coils are made of high-quality cotton and have a larger heating area. Use the bottom airflow control system, which will give you a smoother experience. We can control the desired vapor production, vapor temperature, and taste more precisely. Of course, Skrr Tank uses a child protection lock to avoid e-juice leaks. If you like it too, let me tell you how to buy a cheap Vaporesso Skrr Tank

3Tips to Buy Cheap Vaporesso Skrr

1. We need to go to Vaporesso's official authorized store to make purchases and make sure to buy genuine products.
2. We have to choose a professional shopping platform to ensure that we get quality after-sales service.
3. We are going to buy a store that will give us the best discount.

If you think the same as I think, then I would highly recommend you to buy it at Sourcemore e-cig online shop. Sourcemore is not only the official authorized store of Vaporesso, but it also offers us 47% off. Hey, what are you waiting for? Don't miss this Christmas sale! Come on!

Vaporesso Renova Zero Pod - 59% Off - Dec. 2018

Don't miss the Renova Zero 

If you like Vaporesso Renova Zero Pod too, don't miss this promotion. For more DTL vaping enthusiasts and vaping beginner to get a better vaping experience, Sourcemore brought us a big promotion. Everyone can buy the desired Dream vape at a satisfactory price.

Why do everyone like Renova Zero Kit?

The Renova Zero Pod is a compact size Pod Kit. It has a 650mAh internal battery and supports charging via a USB port to a computer or wall charger. Many friends complain about e-juice leaks on their devices. Now, you don't need to worry. Renova Zero uses a PTF system to avoid any e-juice leaks better. Of course, it is also equipped with a 1.0-ohm CCELL coil for a purer taste. Simple but fun. Renova Zero comes with three output modes: High, medium and Low. We are free to switch the vaping effect we want.

Hey, what are you waiting for? Come to take the Renova Zero Pod away at Sourcemore!

Only $39.2 SMOK Mag Grip 85W/100W Kit - Take it Away

SMOK Mag Grip Kit

When we talk about SMOK products, we are always talking about its vapor production capacity and appearance!
After the launch of the SMOK Mag Kit, SMOK quickly caught the attention of many vapers. You can even see vAustinL playing on SMOK Mag on Youtube! But SMOK brought us a brand new Mag family product, SMOK Mag Grip. This device that is superior in size and weight to Mag Kit makes more vapers love it!

Best Deal for Mag Grip

More portable size, more optimized performance, Mag Grip Kit will be your best vape companion! It has the same pop-up button as the pistol. When the button is pressed, the battery compartment will slide out like a magazine. Awesome!

With a 21700/20700 battery, you will get a maximum of 100W output. The classic TFV8 Baby V2 Tank will not disappoint you in the production of vapor. For you who are unique, Mag Grip will bring you more attention.

Sourcemore online is in the process of promoting the Mag Grip Kit. Now, for only $39.2, you can take Mag Grip away. Do not hesitate!

2018 Newest SMOK Pod System Kit | SMOK Nord Kit

SMOK Nord Kit, the advanced version of Novo, is a button-triggered pod system device. It has 1100mAh battery capacity, more than two times larger than Novo's, making it a definitely powerful one among pod system devices! It is equipped with two exclusive coils, Nord Mesh 0.6 Ω coil and Nord regular 1.4Ω coil, one is perfect to get massive vapor; the other can offer excellent MTL experience. Its size is a little bigger than Novo, more comfortable to hold in hand, and it has a newly added button to start vaping and provide information about battery life. Besides, there's an e-liquid window on the pod, all of which are for your convenience to check the surplus of eliquid! Innovation keeps changing the vaping experience!

BIGGER SIZE BETTER DESIGN

At the first sight, you may think Nord is simply the enlarged version of Novo, but it has fully improvements.
It is bigger and thicker, more comfortable to hold, and it has improved the mouthpiece, added a press button etc.

FAMILIAR OPERATIONS

Different with normal pod system devices, Nord is a button-triggered one, you need to fast press the button five times to power on the device and long press the button to vape. Same operations with box mods.

IMPROVED MOUTHPIECE

Nord's mouthpiece continues the duck-billed design, but it also has a great improvement, with a lip curve on it, this mouthpiece could perfectly fit your mouth and offer better user experience.

PORTABLE SIZE

Nord is a little bigger than Novo, but still a small one, you can freely put it in bags or pockets, wherever you go, it can be a good company.

LARGER ELIQUID CAPACITY

Nord has 3ml capacity, compared with Novo, the eliquid capacity has increased by 50%!

MULTIPLE COIL CHOICES

In this kit, there are two coils included: Nord 0.6Ω mesh coil and 1.4Ω regular coil. The 0.6Ω mesh coil is specially designed for sub ohm vaping, it has a large mesh inside, with which you can get faster heating process and massive vapor clouds; and the 1.4Ω regular coil is designed for MTL vaping, you can enjoy throat hit with it.

 INTELLIGENT BATTERY LIFE INDICATOR

There's a LED light on the button, press it twice then red, orange or green light will be on. Red light will on when battery power is lower than 30%; orange light will on when power is between 30% to 70%; and green light will on when power is between 70% to 100%. According to the different light colors you can clearly know the device's battery conditions.

MULTIPLE PROTECTIONS

NORD provides multiple types of protections to avoid potential risks.

HOW TO FILL WITH ELIQUID

Do not vape immediately after full filling the pod, and let the device kit stand for 2-3 minutes to get its cotton completely saturated.

Do you like it or SMOK Novo one?

lightspot|Eleaf iStick NOWOS 80W TC Kit with ELLO Duro Atomizer|Open Box Video

Eleaf iStick NOWOS 80W TC Kit is the most simple-designed kit I have used in my vaping experience, which contains five colors: Blue, Dazzling, Red, Silver, Black. You don’t even need to worry about that you are an old-fashion guy in the vaping world.

What is the lightspot of leaf iStick NOWOS 80W TC Kit？I believe the TYPE C port is definitely futuristic and desirable, especially for those who are outside with different devices. The TYPE C port supports QC3.0 / PD3.0 protocol for faster charging than ever. In addition, the innovative LED digital and touch buttons let everything become easy-operating and smooth. Equipped with two new kinds of dual mesh coil, the HW-M Dual 0.2ohm Head & the HW-N Dual 0.25ohm Head, bringing you the best vaping experience with huge vapor clouds and enhanced flavor.

Parameter

Size: 43mm*28mm*135mm

E-liquid capacity: 6.5ml

Battery capacity: 4400mAh

Output wattage: 80W max

Output voltage: 9V max

Resistance range: 0.1-3.0Ω

Multi-protections: over-charge/over-discharge/over-current/over 10s/short-circuit/charging temp protections

Features

 1. Unlike older USB, it doesn’t matter which side is up with the TYPE C.

 2. The iStick NOWOS supports QC3.0 / PD3.0 protocol and allows three charging modes (DC5V/2A, DC9V/2A and DC12V/1.5A), faster than ever.

 3. The iStick NOWOS comes with the most sensitive and responsive touch buttons.

 4. All-new LED digital screen displays all essential parameters clearly and briefly.

 5. iStick NOWOS applies a temperature protection system to ensure the safety of charging process.

 6. Compact and long sustainable, iStick NOWOS comes with 4400mAh internal battery.

 7. Eleaf iStick NOWOS provides multiple protections to avoid potential risks.

 8. iStick NOWOS can hold various tanks up to 26mm diameter without any overhang.

 9. iStick NOWOS features fashionable and exceptional appearance, stunning in every angle.

 10. ELLO Duro utilizes two new dual mesh coils, the HW-N Dual 0.25ohm coil and the HW-M Dual 0.2ohm coil, providing enhanced flavor and huge vapor clouds.

 11. ELLO Duro adopts lock system for child’s security.

 12. ELLO Duro features easy top filling design with two kinds of refilling seals.

Open Box Video

Comment utiliser Eleaf Pico Squeeze 2 avec Coral 2 - Manuel d'utilisation Français

Notice d’utilisation

Merci d’avoir choisi Eleaf ! Veuillez lire ce manuel attentivement avant utilisation de votre produit. Pour toute information complémentaire et si vous avez des questions sur ce produit, merci de vous adresser à votre agent local ou consulter notre site www.eleafworld.com.
Pour des instructions plus détaillées, veuillez trouver une vidéo tutoriel sur: www.eleaf-world.com/video/.

Comment utiliser?

Mise sous / hors tension: dévissez le capuchon de la batterie et retirez la pièce isolante qui est attachée au côté négatif de la batterie 21700 si le kit que vous avez acheté est celui qui comprend une batterie 21700. Ensuite, installez une batterie 21700 ou une batterie 18650 en utilisant le manchon de batterie dans l'appareil et vissez le couvercle de la batterie sur l'appareil. L'appareil peut être allumé / éteint en appuyant 5 fois sur le bouton de tir.

Remarque:

1. Faites attention de ne pas utiliser des accumulateurs avec l’enveloppe déchirée car c’est dangereux pour votre sécurité.
2. Assurez-vous d’utiliser des accumulateurs à haut débit 18650 / 21700 dont le courant de décharge continue doit être au-dessus de 25A.
3. Avant d'utiliser, veuillez régler la puissance à une valeur appropriée en fonction de l'atomiseur installé.

Remplissage d'E-liquide: retirez le couvercle de la bouteille d'e-liquide, sortez la bouteille
d'e-liquide, remplissez la bouteille et replacez la bouteille d'e-liquide et son couvercle.

Remarque:
1. La position de l'orifice de remplissage de la bouteille d'e-liquide est excentrique et polarisée d'un côté. Veuillez placer le côté où l'orifice de remplissage est orienté vers l'encoche interne de l'appareil afin que vous puissiez diriger avec succès l'orifice de remplissage vers la prise en silicone.
2. Si la bouteille en silicone d'origine doit être remplacée par une nouvelle, veuillez d'abord dévisser
le bouchon métallique situé sur le dessus de la bouteille d'e-liquide, puis vous pourrez effectuer le
remplacement.
Vapez: maintenez le bouton de tir enfoncé pour prendre une bouffée lorsque l'appareil est allumé. Lors de la vape, la LED s'allume dans la couleur que vous avez choisie ou ne s'allume pas si vous éteignez la LED.
Remarque: lorsque vous utilisez un atomiseur Squonk RDA, veuillez presser la bouteille de silicone pour laisser l'e-liquide pénétrer dans la bobine et le coton, puis vous pouvez prendre quelques
bouffées. Répétez cette action pour continuer à vapoter.
Boutons de réglage verrouillés / déverrouillés: maintenez les boutons + et - enfoncés simultanément pendant deux secondes lorsque l'appareil est allumé pour verrouiller ou déverrouiller les deux boutons de réglage.
Rotation de l'affichage: maintenez les boutons + et - enfoncés simultanément pendant deux secondes lorsque l'appareil est éteint, l'affichage de l'écran tournera de 180 degrés.
Chargement: la batterie 21700/18650 peut être chargée dans l'appareil via un port USB via un adaptateur mural ou un ordinateur ou chargée avec un chargeur de batterie externe. Si le voyant est allumé, le voyant de l'appareil s'allumera pendant 5 secondes lorsque vous branchez l'appareil pour le charger.
Mise à jour du micrologiciel: le micrologiciel peut être mis à jour en connectant l'appareil à un ordinateur via le port USB via un câble micro-USB.

Opérations générales

1. Sélectionnez le mode Vape: lorsque l'appareil est sous tension, VW, Bypass, TC-Ni, TC-Ti, TC-SS316, TCR-M1, TCR-M2 et TCR-M3 en appuyant d'abord 3 fois sur le bouton de tir et en appuyant sur +/- pour choisir un mode.

Ajuster la puissance: en mode VW, la puissance peut être ajustée en appuyant sur le bouton +/-. Maintenez le bouton +/- enfoncé pour augmenter / diminuer rapidement la puissance. En mode TC (Ni, Ti, SS, TCR-M1 / M2 / M3), appuyez d'abord brièvement sur le bouton de tir 4 fois, puis appuyez sur le bouton +/- pour régler la puissance.
Réglez la température: en mode TC (Ni, Ti, SS, TCR-M1 / M2 / M3), appuyez simplement sur le bouton +/- pour augmenter / diminuer le réglage de la température.
2. Autres paramètres: appuyez sur le bouton de tir et le bouton + simultanément pour entrer dans le menu, et vous serez en mesure de verrouiller / déverrouiller la résistance dans les modes TC, choisir un paramètre à afficher sur l'interface principale, activer / désactiver furtif, tourner on / off logo personnalisé, choisir la couleur de la LED ou éteindre, vérifier la version firmware / matériel de l'appareil et vérifier l'état de la batterie, activer / désactiver la fonction de préchauffage en mode VW et régler la valeur TCR dans TCR (M1 / M2 / M3) simplement en appuyant sur le bouton +/- pour déplacer ou ajuster et appuyez sur le bouton de tir pour confirmer votre choix. Une fois les réglages terminés, passez simplement à EXIT et cliquez à nouveau sur l'interface principale.
Vous pouvez remettre à zéro le compteur de Puff / Time en vous déplaçant vers le sous-menu de Puff.

Garantie

Nous ne sommes pas responsables des dommages causés par une erreur humaine. Une garantie légale est appliquée.
Avertissements

1. Garder hors de la portée des enfants.
2. Ce produit n'est pas recommandé pour les jeunes, les non-fumeurs, les femmes enceintes ou allaitantes ou les personnes allergiques / sensibles à la nicotine.

Contre-indication 

1. N'essayez pas de réparer le produit vous-même, car des dommages ou des blessures peuvent se produire.
2. Ne laissez pas le produit dans un milieu de température ou d'humidité élevées, sinon il pourrait être endommagé.
3. N'utilisez pas ce produit à d'autres fins que la vape et n’ingérer pas de e-liquide.

Effets secondaires possibles

1. Ce produit peut être dangereux pour la santé et contient de la nicotine qui est addictif.
2. Pour les personnes ayant des effets indésirables après l'utilisation de ce produit, il est recommandé d'utiliser le e-liquide à faible teneur en nicotine ou sans nicotine.

How to use Coral 2 Tank

Utilisation

1. Visser l'atomiseur sur un mod, soulever le tube de l'atomiseur pour exposer le plateau de montage, puis dévisser la résistance présente;
2. Soulevez la vis sous la base du flux d'air à l'aide du tournevis pour retirer la base du flux d'air de sorte que vous aurez plus d’espace pour installer les résistances;

3. Soulevez les deux vis situées sur les montants du pont à l'aide du tournevis;
4. Fixez la résistance pré-fabriquée sur le plateau, serrez les deux vis, replacez la base du flux d'air et ajustez la position de la résistance; (Remarque: veuillez vous assurer que la résistance ne soit pas en contact avex la surface du plateau, de la base du flux d'air ou la paroi interne du tube de l'atomiseur. Une fois terminé, activer l'appareil pour chauffer la résistance jusqu'à ce qu'elle soit rouge.)
5. Une fois la résistance refroidie, passez un morceau de coton dans la résistance et coupez le coton;
6. Imbiber de quelques gouttes d'e-liquide la résistance et le coton avant la première utilisation;
7. Assemblez toutes les autres pièces, y compris le tube de l'atomiseur, l'embout et la bague décorative ensemble;
8. Enfin, faites tourner le tube de l'atomiseur pour obtenir le flux d'air optimal que vous préférez; (Remarque: pour obtenir le plus d'air possible, il est recommandé de diriger le trou d'écoulement d'air vers le trou de la base du flux d'air.)
9. Lorsque vous utilisez cet atomiseur sur un mod Squonk, veuillez presser la bouteille Squonk pour laisser l'e-liquide monter dans l’atomiseur et le coton, pour

ensuite prendre quelques bouffées. Répétez cette action pour continuer à vapoter.

Garantie

Nous ne sommes pas responsables des dommages causés par une erreur humaine. Une garantie légale est appliquée.
Avertissements

1. Garder hors de la portée des enfants.
2. Ce produit n'est pas recommandé pour les jeunes, les non-fumeurs, les femmes enceintes ou allaitantes ou les personnes allergiques / sensibles à la nicotine.

Contre-indication

1. N'essayez pas de réparer le produit vous-même, car des dommages ou des blessures peuvent se produire.
2. Ne laissez pas le produit dans un milieu de température ou d'humidité élevées, sinon il pourrait être endommagé.
3. N'utilisez pas ce produit à d'autres fins que la vape et n’ingérer pas de e-liquide.

Effets secondaires possibles

1. Ce produit peut être dangereux pour la santé et contient de la nicotine qui est addictif.
2. Pour les personnes ayant des effets indésirables après l'utilisation de ce produit, il est recommandé d'utiliser le e-liquide à faible teneur en nicotine ou sans nicotine.

Another Dual Coil RDA | New Vandy Vape Phobia V2 RDA

Vandy Vape has always been an e-cigarette brand that I am very concerned about. do you know? It also introduced a new RDA, Phobia V2. Unlike the previous we know Phobia RDA, this device has been fully upgraded to the Airflow system. It uses a built-in airflow ring to allow us to more precisely control the vaping effect we want.

Will it be your next RDA? Let me tell you more about the Phobia V2 RDA details. The device is 24mm in diameter and supports dual coil building. Unlike previous equipment, phobia v2 RDA uses a side airflow control system.

The Airflow air intake directs the air more directly to the coil to achieve a more desirable vapor production environment. It allows us to use a single coil building or dual coil buildings. It uses a large diameter drip tip to get more vapor in a flash. In the package, we will get the accessories from Vandy Vape.

There are screwdrivers, screws and other accessories. As a Dual coil building device, phobia v2 has better e-juice leak prevention and temporary storage capabilities. Its 8.8mm base height is not only good for avoiding e-juice leaks but also makes the BF mod more convenient to use. So what do you think?

Is the Joyetech eGo AIO Mansion Pod Kit a Good Choice for You?

Joyetech has launched a new Pod Kit, eGo AIO Mansion. The device is compact and compact and has excellent anti-leaking structure. Of course, it also has a 1300mAh battery to give us a longer lasting vape time, but will it be a good choice for you?

Let me tell you more about the eGo AIO Mansion Pod System Kit details. This device has air inlets on both sides of the mouthpiece and a top airflow control system to avoid e-juice leaks. Unlike many universal Pod Kits, we can screw out the coil directly using the screwdriver at the bottom of the Mouthpiece.

For vapers who like to try different e-juices, this device allows you to clean the e-juice tank anytime, anywhere. There is an air sensor in the middle of the device and support for pressing the fire button, which means we have two ways to use it. Whether you are used to pressing the fire button or prefer to use it like the usual Pod Kit, it can meet your needs very well.

The BF SS316 0.6ohm head is the engine of this device, powerful and excellent. It supports us to use most of the VG/PG e-juice on the market. And it has excellent atomization capacity to bring more vapor production.

High Nicotine& Salt Nicotine？

We need to note that it does not support the use of high-nicotine e-juice and salt-nic. Its low resistance makes us get too much nicotine in an instant and can cause physical discomfort.

But for friends who like massive vapor, it will be a great choice. In short, this is a stylish and portable electronic cigarette device. Its excellent airflow system allows us to carry it in our pockets without worrying about any e-juice leaks. The most important thing is that the 0.6-ohm coil will give us an excellent vapor experience and taste anytime, anywhere. Hey, what do you think?

Geek Vape Ammit MTL RDA 22mm | Something You Don’t Know?

Geek Vape is a hot e-cigarette brand in 2018. If Aspire is a must-have brand for novices, then Geek Vape is a paradise for vapor players. Today's Ammit MTL RDA is a product that cannot be ignored. It is a product that MTL Vape can't miss.

For MTL vape, the biggest role of Atomizer is to give the user a comfortable taste. Friends who like MTL Vape used to be smokers, so they are particularly valued for their flavor and taste.

On this device, we will get an experience that rivals cigarettes. Let me tell you more Ammit MTL RDA  details. Two narrow-diameter drip tips allow the vapor to be better compressed, and we end up with a more intense flavor. The taste comes from the airflow. The innovative airflow system makes this device more playable.

We are free to control the amount of air intake we want, and the air can be directed to the coil more precisely. The Top airflow control system not only avoids e-juice leaks but Geek Vape brings a different experience. It has an air deflector inside the atomizer, so the air will be in good contact with the coil from the bottom, resulting in better atomization.

Not only that, it has two different control methods, allowing us to more precisely control the vapor temperature, vapor production and so on. By the way, you may be worried that RDA will need to add e-juice frequently. Now Ammit RDA is equipped with a BF Pin, which you can use with your BF Mod. I think you like it if you are crazy with MTL Vape like me.

Vandy Vape NS Pen Kit 650mAh Package

What I want to share today is a Starter Kit from Vandy Vape. It is the NS Pen Kit. This device has a 650mAh battery to support our vape time all day. For many people, the nicotine salt gives us a more impactful nicotine experience. Today's device is a magnified nicotine experience.

If you want to know more, let's take a look at what’s in the Vandy Vape NS Pen Kit package:

A Vandy Vape NS PEN Kit 650mAh & 1.5ml (this device has a 650mAh battery and can store 1.5ml e-juice)

One QC USB Cable (please use this charging cable to ensure the best charging efficiency)

a Spare Parts Bag

A Warranty Card (this is the only warranty certificate for this device, please keep it)

Two NS Coil 1.2ohm (Material: SS316L) (There are two 1.2 ohm coil heads here.

Please make sure the coil head is installed before use)

An Instruction Manual (please read the manual carefully before use. The manual will tell you how to use the Vandy Vape NS Kit correctly)

What Will You Get from Vaporesso Drizzle Fit Starter Kit

In 2018, Vaporesso received a lot of praise from vaper, especially its Pod Kit. So today is a Drizzle Fit Starter Kit from Vaporesso. Will it surprise us like the Pod Kit?

The Drizzle Fit Starter Kit consists of two parts, the Drizzle Fit Mod and Drizzle 1.8ml Tank. It has a built-in 1400mAh battery and has a maximum output of 40W. The biggest surprise of this device is that it can automatically recognize the resistance of the coil and help us choose MTL Mode or DTL Mode.

Not only that, but it also comes with Top Airflow system and Top Refilling system. If you are interested in this product, let's take a look at what’s in the Vaporesso Drizzle Fit Kit package:

One Vaporesso Drizzle Fit Mod 40W 1400mAh

A Vaporesso Drizzle 1.8ml Top Filling Tank (this Atomizer can store 1.8ml e-juice with top-filling system)

One EUC Mini CCELL Coil (1.3-ohm) (a 1.3-ohm coil, supporting us for MTL Vape)

One EUC Mini Traditional Coil (1.4-ohm) (a 1.4-ohm coil that supports our use of high-nicotine e-juice)

A Replacement Glass Tube (this is a spare glass tube. When the pre-loaded glass tube is damaged, we can replace it ourselves)

a USB Charging Cable

A User Guide (please read the user guide carefully before use. The user guide will tell us how to use the Drizzle Fit Starter Kit correctly)

a Warranty Card (please keep it)

Vandy Vape New RDA Kit launched | Pulse X BF Starter Kit

Do you know that Vandy Vape has introduced a new product? This is a new RDA Starter Kit, Pulse X BF. Like all RDA Vape Kits, this device comes with an 8ml e-juice bottle and a super-output of 90W. So what characteristics does it have that we don't know?

Yes, it has. This device comes with a brand new RDA Atomizer. Unlike the previous squonk RDA, the Pulse X Atomizer has a flexible coil desk. It supports us to install the coil vertically or horizontally, and it is two coil buildings.

For those who like high content VG e-juice, they will be particularly excited, because the changed e-juice outlet can directly transport e-juice to the coil. Now, you don't need to consider any oil conductivity of cotton. You can choose any e-juice you like. Not only that, but it also knows that we add e-juice through the top or bottom.

Here you can use the 21700/20700/18650 battery and reach a maximum output of 90W. The Pulse X BF Kit will also give us more interesting settings, such as BRI80: brightness settings, FIP: Locking ignition, ST-30: Sleep Time and more. So do you like this device? If you like it, you can go to the online e-cigarette store.

Portable Eleaf iStick Amnis Kit with GS Drive Tank | More Details

Extraordinary and smooth, the Eleaf iStick Amnis Kit with GS Drive Tank will completely define our understanding of the Starter Kit. As an e-cigarette enthusiast, I started to pay attention to this product when Eleaf released the notice.

Official parameters indicate that this is an ultra-compact starter kit with a height of 122mm, a width of 24mm and a depth of 18mm. So what about its performance?

If you want to know more, let me tell you more about Eleaf iStick Amnis Kit with GS Drive Tank details. As the picture shows, this is an ergonomically designed product that gives us a more comfortable grip.

The most important thing is that it is covered with a large amount of rubber coating, allowing users to feel smooth and soft touch.

GS Drive Tank is a highlight of this product, it inherits the elegant features of the GS series, and is equipped with the New GS Air M (Mesh) Coil that everyone is looking forward to.

Eleaf used a new mesh structure to upgrade the e-juice atomization effect again. The Tiny size iStick Amnis Kit allows us to carry it easily in our pockets, and the 900mAh battery provides longer lasting vaping time. Now, you will get a good taste anytime, anywhere. Do you like it?

10 Tips To Know Innokin EQ 800mAh Starter Kit

The Innokin EQ Kit is an ultra-portable Pod Kit. Its surface is covered with a rubber coating to give us a better touch and make the entire product look more refined. So here you can also get a mouthpiece cup, you can cover it when you don't need vaping. Now, even if you put the EQ Kit in a bag, it can be clean and fresh.

In fact, the EQ Kit is not as simple as we think. This is the first or one of the Pod Kits that use a mesh coil. Not only does it satisfy us with the performance of high-nicotine, but it also has excellent vapor production capacity. Let us tell you more about Innokin EQ Pod Kit details

Innokin EQ Kit size: 90 x 35 x 15mm

The Innokin EQ Kit has an internal battery of 800mAh and supports charging via USB interface.

Innokin EQ Kit with a 0.5-ohm mesh coil gives us a more powerful vaping experience

The Innokin EQ Kit has two different output modes, regular mode (13.5W) and boost mode (15.5W).

Innokin EQ Kit can store 2.0ml e-juice

The Innokin EQ Kit uses a rotary fill port start method. By rotating the tank base, we can add e-juice

Innokin EQ Kit with magnetic connection for more stability

Innokin EQ Kit comes with an LED indicator to remind us of battery life

The Innokin EQ Kit supports our use of high-nicotine e-juice and PG/VG e-juice. (I don't recommend using salt-nico to prevent damage to the throat and lungs)


So this is the Innokin EQ kit, what do you think? If you like it, you can go to Cloumix e-cigarette online shop to buy.