Header Ads

Wismec Reuleaux RX2 20700 with GNOME User Manual

Recently, Reuleaux RX2 20700 is more and more popular, and can you operate it correctly?

1. Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
Note:
(1). Please adjust the wattage to a proper range to match the atomizer you used before using.
(2). Please be careful not to use battery with torn shell for safety.

Wismec Reuleaux RX2 20700 with GNOME Starter Kit vape store

2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.

3. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.

4. Micro USB port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cells and charge them through external charger.

5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.

 ⃟   How to Shift VW/TC-Ni/TC-Ti/TC-SS/TCR Modes
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm. Under TC/TCR mode, while the mode sign flashing, press the left regulatory button to enter into its submenu. Then press the right regulatory button to choose TC-Ni/Ti/SS (TC mode) or M1/M2/M3(TCR mode). Press the fire button to confirm.

Following the above steps to properly operate your Wismec Reuleaux RX2 20700 with GNOME Starter Kit, which can give you a wonderful vaping experience.

No comments

Powered by Blogger.